Video Demo

Boeshield 3pc Total Metal Care

1. Boeshield T-9^® protectant and lubricant can be used on all metal surfaces where corrosion protection and/or sliding lubrication are needed. It penetrates, displaces moisture, lubricates, is waterproof, stops existing rust, exhibits excellent corrosion resisting results in salt spray exposure, and lasts for many months.
2. Rust Free removes rust and stains from any surface including cast iron and steel. Spray on, wait 30 seconds and then rub lightly with a non-metallic abrasive pad or brush to agitate (stir). Continuous agitation is not necessary. Areas which are deeply pitted should be worked more. After 3 minutes wipe off. If rust still remains repeat application. When using Rust Free? work in a well ventillated space and use normal precautions for corrosive cleaners. For large areas such as saw table tops clean small sections at a time.
3. Blade & Bit removes resin, gum and pitch from saw blades, drill bits, tool tops, etc. Spray on, allow to soak in for 60-90 seconds and wipe off. Use of a non-metallic, stiff bristled brush will ease cleaning teeth on saw blades. If rusty, use RUST FREE? after BLADE & BIT? then protect with BOESHIELD T-9®.
   
   
   

Quantity: